Malaysia Temperature Sensor Supplier

Home of Temperature Sensing

 
 

SSPRT.

Calibration Probe 1 Resize

Metal Sheated Semi Standard Platinum Resistance Thermometer are widely used as a reference to calibrate various temperature probes, particularly in secondary calibration laboratories.

SSPRT is constructed with a 6 mm outer diameter metal sheath of high durability. Inside the sheath, the sensing element is protected to shield the sensor from contamination by free floating metal ions found within metal environment at high temperature.

The electrical configuration is a four wire current-potential hookup to eliminate effect of lead wire resistance.

A special powder mixture is filled into the sensor capsule to support the element wire to protect the element from mechanical shocks.

After all element parts and powder are assembled into the sensor protection capsule, a pure mixture of gases, including oxygen is filled into the sensor is hermetically sealed under pressure.

Fixed point calibration is provided as an option at TPW(0.01°C), Ga(29.7646°C),
Su(231.928°C), Zn(419.527°C), Al(660.323°C).

Key features.

  • High accuracy & stability
  • Manufactured & tested under strict quality control standards
  • Cycled to stability
  • Fast response

Specifications.

Temperature range  up to 660°C
Outer diameter 6 mm 
Outer sheath Inconel 600 
Lead wires Platinum 
RTPW 100Ω(±1Ω)/25 
Stability ±50 mk 
Long term drift ±50 mk
Termination M-F gold plated 4 Pin Lemo Connector
Calibration uncertainty

〈 15 mk at 0.01°C
〈 30 mk at 29.7646°C
〈 40 mk at 231.928°C
〈 40 mk at 419.527°C
〈 40 mk at 660.323°C 

Calibration NABL Accredited Calibration Certificate with ITS 90 Constants and Resistance Vs Temperature Chart in 1°C increment

All the above descriptions are subject to change without prior notice.

For enquiries, kindly email us at enquiry@malaysiatemperaturesensor.com Click-here

RTD (TPRT).

Calibration Probe 2 Resize

TPRT is highly accurate platinum resistance thermometer (pt100) offer the temperature range of 38 to 400°C.

TPRT gives the benefit of high accuracy and low drift in a solid metal case. Wire wound resistance element give good stability with low temperature coefficient and high accuracy.

TPRT is constructed with a 6 mm outer diameter of SS316 sheath of high durability.

TPRT is available in different accuracies and length.

Key features.

  • High accuracy & stability
  • Manufactured & tested under strict quality control standards
  • Cycled to stability
  • Fast response
  • Low drift
Sensor Type Range (°C) Accuracy 
RTD PT 25.5
PT 100
PT 200 
-38 to 400
-38 to 250
-38 to 250
-38 to 250 
Class A
1/3 DIN
1/5 DIN
1/10 DIN 

Specifications.

Type  PT 100 ( 4 wire )
Temperature range  -38 to 400°C
Element  PT-100 
Accuracy  Class A 
Sheath diameter  6 mm 
Sheath length  300, 450, 600 mm 
Cable length  1000 mm or as per requirement
Outer sheath  SS-316 
End connection  Flying lead 

Calibration Probe 2 Chart Resize

All the above descriptions are subject to change without prior notice.

For ordering, kindly includes the following information.
Model no selection : TPRT - accuracy - length
Ex: TPRT-A-300

For enquiries, kindly email us at enquiry@malaysiatemperaturesensor.com Click-here

Master Thermocouple (TTC).

Calibration Probe 3 resize

These are Master Thermocouple Without Cold Junction. This range is based on popular thermocouple standards and available for different temperature range, sensitivity and length.

TTC are highly accurate and stable thermocouple with minimum uncertainties. It offer wide temperature range which is ideal for all industrial applications. The size, length and thermocouple material are such that gives the best and most stable results. Options with built in cold junction compensation is also available.

Key features.

  • High accuracy & stability
  • Cycled to stability
  • Fast response
  • Manufactured & tested under strict quality control standards
  • NABL accredited 3 point calibration certificate
Model
No
 
T/C
Type
 
Material  Range
(°C)
 
Accuracy  Sensitivity
(µv/°C)
 
Options in
sheath
length (mm)
 
Options in
cable
length
(mm) 
Outer
sheath
 
TTCN

TTCK 
N

NiCrSi-
NiSi
NiCr-NiAl 

up to
1200 

±1.1°C or
±0.4% 
39 - 41  300, 450 &
600 
1000 & 1500  Inconel 
TTCR

TTCS 


S
Pt-13RhPt

Pt-10RhPt 
up to
1500 
±0.6°C or
±0.1% 
6 - 12  300, 450 &
600 
1000 & 1500  Ceramic 

All the above descriptions are subject to change without prior notice.

For ordering, kindly includes the following information.
Model no selection : Model no - length
Ex: TTCN-300

For enquiries, kindly email us at enquiry@malaysiatemperaturesensor.com Click-here

Cold Junction Probe (CTC).

Calibration Probe 4 resize

These probes are used with various temperature sensor for cold junction compensation. The selection of probe depends on the type of thermocouple. Double junctions are most commonly supplied (4 wire connections per junction). Single junctions (2 wire connections per junction) can also be supplied. Probes are available for different type of thermocouples like J, K, N, R, S, T, E.

Key features.

  • High accuracy & stability
  • Cost effective solution
  • Manufactured & tested under strict quality control standards

This probe is the best deal for all the calibration laboratory and test houses.

Model
No
Type
Probe1,
Probe2
Accuracy  Diameter
(mm)
Options in
sheath
length (mm)
  
Options in
cable
length
(mm)  
End
Connection
Outer
sheath
CTC-N-N N, N
±1.1°C or
±0.4%

6/8 

400 / 600 1000 / 1500 Flying lead/M/F connector Copper
CTC-K-K  K, K  ±1.1°C or
±0.4% 
6/8  400 / 600  1000 / 1500  Flying lead/M/F connector  Copper 
CTC-R-R  R, R  ±0.6°C or
±0.1% 
6/8  400 / 600  1000 / 1500  Flying lead/M/F connector   Copper 
CTC-S-S  S, S  ±0.6°C or
±0.1% 
6/8  400 / 600  1000 / 1500 Flying lead/M/F connector Copper 

All the above descriptions are subject to change without prior notice.

For ordering, kindly includes the following information.
Model no selection : CTC - probe 1 - probe 2 - length
Ex: CTC-K-R-400

For enquiries, kindly email us at enquiry@malaysiatemperaturesensor.com Click-here